Application scenarios

Application

1. For circuit boards with a slot ratio of over 20%, the drilling of slot holes should be changed to gong technology. The more slot holes there are, the more obvious the improvement rate will be

The PCB SOLT be more than 20% of CNC,need to improvement in processing efficiency by

Changing the drilling to routing;

2. The metal edging board and drilling process are completed on the same workbench, saving manpower investment for the upper and lower boards without the need for repositioning

For metal-cald PCB and can to drilling and routing which done on the machine the same.

no need to loading and unloading then to save time and cost:

3. Applied to small batch single drilling or gong processing, used as a traditional drilling or gong machine

Used for small batch drilling and routing the same for conventional CNC amchine;

4. This device can completely solve and prevent the problem of short slot misalignment

The machine can to solving solt deformation by the machine;

5. It can directly drill 6.5-13mm ultra large knives in one go.

Machine can to drilled out diameter6.5-13mm directly.;

Main performance of the equipment

Equipment Main performance

1. Windows 10 operating system, control system adopts Huajian's proprietary intellectual property Delta5.0

Window 10 operation system to control machine base on own R&D Delta 5.0

2. The machine tool and motion axis reference platform are all made of natural black granite, with high precision and minimal susceptibility to external environmental changes

Machine frame and motion axis reference plane made entirely of natural black aranite.

providina hiah precision and minimal sensitivity to externa environment changes

3. The Z-axis transmission adopts ball screws from world-renowned Japanese NSK or THK companies

The Z-axis drive uses ball screws from world-renowned NSK or THK brands.

4. Guided by THK from Japan and Schneberg linear guides from Germany

Guiding system use THK brand from Japan and Germany Schneeberager for liner guides

5. Drilling air floating spindle 200000 revolutions per minute, gong spindle 60000 revolutions per minute

Driling spindle speed:200K.rpm air-floating spindle.routing spindle speed:60K.rpm

6. Automatic measurement of tool length, contact type tool breakage detection

Automatic measuring the lenath of tool and contact-based tool breakage detection