Product advantages

Eight axis dual control drilling and gong integrated machine (Type 22)

Application scenarios

Application

1. The HJ-LMO8SXDR eight axis dual control drilling gong integrated machine effectively solves the quality problems of skewness, deviation, and irregularity in short slot hole drilling by using the gong groove method,

At the same time, it can significantly improve the efficiency of slot machining.

HJ-LM08SXDR Eight-axis dual control machine can solve deviation and irregular shape of

SOLT by routing method,then to improve the efficiency of slot processing the same;

2. For circuit boards with a slot ratio of over 20%, the drilling of slot holes should be changed to gong technology. The more slot holes there are, the more obvious the improvement rate will be

ThePCB SOLTbe more than20% ofCNc,need to improvementin processing efticlency bv

Changing the drilling to routing;

3. The metal edging board and drilling process are completed on the same workbench, saving manpower investment for the upper and lower boards without the need for repositioning

For metal-cald PCB and can to drilling and routing which done on the machine the same.

no need to loading and unloading then to save time and cost;

4. Applied to small batch single drilling or gong processing, used as a traditional drilling or gong machine

Used for small batch drillina and routing the same for conventional CNC amchine;

5. This device can completely solve and prevent the problem of short slot misalignment

The machine can to solving solt deformation by the machine;

6. It can directly drill 6.5-13mm ultra large knives in one go.

Machine can to drilled out diameter 6.5-13mm directly.;

Main performance of the equipment

Equipment Main performance

1. Dual independent control system, dual table independent movement, Windows 10 operating system, control system using Huajian's proprietary intellectual property Delta5.0

Two sets of independent control system to support double table independent ,Window 10 operation system

to control machine base on own R&D Delta 5.0

2. Two different processing files can be processed separately on two tables using different processing modes, which can be drilled or gonged

Two independent sets can to ndependent operating by two different processing file.

drilling and routing which doing the same time

3. The processing of small batches of circuit boards and samples can save costs

Cost-effective for processing small batch and sample of PCB

4. The machine tool and motion axis reference platform are all made of natural black granite, with high precision and minimal susceptibility to external environmental changes

Machine frame and motion axis reference plane made entirely of natural black granite

providing high precision and minimal sensitivity to external environment changes

5. The Z-axis transmission adopts ball screws from world-renowned Japanese NSK or THK companies

The Z-axis drive uses ball screws from world-renowned NSK or THK brands.

6. Guided by THK from Japan and Schneberg linear guides from Germany

Guiding system use THK brand from Japan and Germany Schneeberager for liner guides

7. Drilling air floating spindle 200000 revolutions per minute, gong spindle 60000 revolutions per minute

Drilling spindle speed:200K.rpm air-floating spindle.routing spindle speed:60K.rpm

8. Automatic measurement of tool length, contact type tool breakage detection

Automatic measuring the lenath of tool and contact-based tool breakage detection